Ankylosaurus Ver. 40
Stegosaurus 1:18 Scale Model
Complete Model Series1:18
Print Time
48-96 hours
Part Count
28one
Support Requirements
Need
File Format
STL, OBJ, 3MF
Model Description
A fully armored tank dragon with a powerful tail club. Product ID 453, ideal for museum education, collectible displays, and scene construction.
Key Features
- Full-body armor
- Tail hammer weapon
- Low-profile
- Herbivore Defense
Recommended Print Materials
PLAresin
📋 Printing Guide
Print Settings Recommendations
- • Layer Height: 0.2mm (PLA) / 0.15mm (Resin)
- • Fill rate: 15-20% (structural parts: 25%)
- • Wall Thickness: 1.2mm (3 layers)
- • Print Temperature: Adjust based on material
Assembly Instructions
- • Use model glue or UV resin to bond
- • Sand seams for a smooth finish
- • Dry-fit first to verify compatibility
- • Refer to the included assembly diagram
Post-processing suggestions
- • Handle support removal carefully
- • Sand with 400-800 grit sandpaper
- • Spray primer to enhance adhesion
- • Acrylics or model paints are recommended for coloring.
Notes
- • For first print, use a small test size
- • Large parts: ensure bed adhesion
- • Increase support density for slender components
- • Ensure proper ventilation and protective measures for resin printing