STYRACOSAURUS Ver.40
Stegosaurus 1:20 Scale Model
Complete Model Series1:20
Print Time
48-96 hours
Part Count
29one
Support Requirements
Need
File format
STL, OBJ, 3MF
Model Description
The nasal horn and cervical spine are its defining features. Product ID 454, ideal for museum education, collection display, and diorama construction.
Key Features
- Long-nosed Horn
- Cervical Spine
- Group Defense
- herbivorous
Recommended Print Materials
PLAresin
📋 Printing Guide
Print Settings Recommendations
- • Layer Height: 0.2mm (PLA) / 0.15mm (Resin)
- • Fill rate: 15-20% (structural components: 25%)
- • Wall Thickness: 1.2mm (3 layers)
- • Print Temperature: Adjust based on material
Assembly Instructions
- • Use model glue or UV resin to bond
- • Sand joints for a smooth surface
- • Dry-fit first to verify fit and compatibility
- • Refer to the included assembly diagram
Post-processing recommendations
- • Handle support removal carefully
- • Sand with 400-800 grit sandpaper
- • Primer-spraying compatible for enhanced adhesion
- • Use acrylics or model paints for coloring
Important Notes
- • For first print, recommend testing with a small size
- • Caution: Large parts may detach from the heated bed
- • Increase support density for slender parts
- • Ensure proper ventilation when using resin printers