OVIRAPTOR Ver.41
Oviraptor 1:16 Scale Model
Complete Model Series1:16
Print Time
48-96 hours
Part Count
33one
Support Requirements
Required
File format
STL, OBJ, 3MF
Model Description
Misunderstood dinosaur: actually incubating eggs, not stealing them. Product ID 458. Ideal for museum education, collectible display, and scene building.
Key Features
- parrot-shaped beak
- Crown Ornament
- Incubation
- Feathered
Recommended Print Materials
PLAresin
📋 Printing Guide
Print settings suggestions
- • Layer Height: 0.2mm (PLA) / 0.15mm (Resin)
- • Fill rate: 15-20% (structural components: 25%)
- • Wall Thickness: 1.2mm (3 layers)
- • Print Temperature: Adjust based on material
Assembly Instructions
- • Use model glue or UV resin to bond
- • Sand joints for a smooth surface
- • Dry-fit first to verify fit and compatibility
- • Refer to the included assembly diagram
Post-processing recommendations
- • Handle support removal carefully
- • Sand with 400-800 grit sandpaper
- • Primer-spraying compatible for enhanced adhesion
- • Use acrylics or model paints for coloring
Notes
- • For first print, recommend testing with a small size
- • Caution: Large parts may detach from the heated bed
- • Increase support density for slender parts
- • Ensure proper ventilation when using resin printers